Lande gear tail for FT explorer
Description
Very important / Muy importante The measurements of LANDER_TAIL_ft_EXPLORER.stl must be (35x35x30) mm and the measurements of the NDER_TAAIL_ft_EXPLORER.stl must be (35x35x2) mm. Las medidas de LANDER_TAIL_ft_EXPLORER.stl deben ser ( 35x35x30)mm y las medidas de laNDER_TAAIL_ft_EXPLORER.stl deben ser ( 35x35x2)mm.
Statistics
Likes
4
Downloads
0