Wanhao i3 Plus Pulley Stabilizer -- ACTUAL Stock Hardware
Description
A remix of the great design from DFliyerz. I found the stock screw on my i3 plus was far too short to reach the nut. This remix changes the following: -Shortens length of screw and nut hole so the stock screw reaches. -Bigger holes for 3mm screws (Now for an M3 screw). -Widens gap for the pulley to go in by about 1mm. Spins more freely now. If you find anything wrong with this remix, please let me know and I will update it. Enjoy!
Statistics
Likes
11
Downloads
0