TRS-80 Model 1 Computer
Description
A TRS-80 Model 1 from Radio Shack. Modeled in actual size, so you'll probably want to scale it to 10% or 20%. You'll need to print the top half, a bottom half (with or without feet - actual computer has the feet, but won't need supports to print without the feet), and the keyboard. Glue the top and bottom halves together (the thicker part of the feet go toward the thicker part of the top half). There's about a 1/16" slot that runs all the way around horizontally on the real thing, so you should end up with that as well. Then glue on the keyboard. For best realism, everything should be grey, except the keyboard, which is black. The raised portion of the logo should be silver - you can paint that bit. And the enter key is nominally white. The little raised nub near the logo is a power LED, which is usually red.
Statistics
Likes
4
Downloads
0