Modular articulating desk lamp
Description
A clamp-on desk lamp which uses an E14 / SES / Small Edison Screw lamp holder with a typical M10 threaded connection as is used in a lot of table lamps. Lots available on ebay. I got mine, complete with cable, switch and plug from an old lamp in a charity shop (thrift store) Desk mount will cope with most desk surfaces up to 40mm thick. The printed example uses: 2x 200mm arms 2x 300mm arms 1x shade 1x lamp holder 4x cable clip 5x knob 1x joiner 1x 90 joiner 1x desk mount 1x desk mount bolt 1x m10 connection piece (if not included with the lamp holder) Non-printed parts are: 5x M5x30mm hex head machine screw/bolt 5x M5 nut 1x m10 nut (if not included with the lamp holder) other arm lengths included to suit your circumstances. Each arm has a side for hex bolt head and a graduated side for clamping. Pairs should be used in the same orientation (one side with the hex hole pointing out, one wise with the graduated clamp side facing out) - not facing each other.
Statistics
Likes
313
Downloads
0