TBS Crossfire Immortal T Antenna Arm Mount for Armattan Rooster and Chameleon Ti
Description
Having the antenna below your quad arm is a big risk of having a broken antenna every time you copter lands. This is why protection of the whole system was the key word for this design, extreme rigidity with only 3g weigh added ... and I got to say that it's working for me! With the idea of having a longer range, being my intention to reach further limits, the antenna location needs to be as far from the carbon frame as possible, so considering this, this is my version of a mount for a "TBS Crossfire Immortal Rx Antenna-Arm Location" made specifically for Armattan Rooster and Chameleon Ti (Please have on mind that this antenna mount was designed assuming you have some "landing pads" installed on your quad, I have the thick "Armattan" shaped ones -thing:2773910-, this to avoid landing and crushing all the time your antenna mount when landing your machine...) Super easy install, just snap it on -a little pressure is required- and it will fit and stay in place perfectly, then secure it in place with a couple of zip ties! Please note (clearly visible in the pics) that a black neoprene-silicone tube -like the ones used for fuel on RC engines- was added to the antenna cable with the idea of protecting the exposed lenght, not only from the ground when landing, but also from the sharp carbon fiber frame edge. This is the reason why the cable exit hole is a bit oversized. It works great, the antenna cable is safely protected!!! I found that the easiest way to print it is upside down (cavity facing up), 25% infill and a 2 mm brim width to increase the surface and its adherence to the heated bed. Can be printed in any material, PLA, ABS or even soft materials as TPU (However the soft ones are not my favorite since I prefer some "rigidity" for stability and protection purposes) Please (please, please, please, please, please, please, please) like if you download it or collect it and post a picture if you make it ... and tip me if you love it! ;) Cheers!
Statistics
Likes
69
Downloads
0