(V-Core) Electronics Enclosure System with Duet Ethernet
Description
**Update 23 march: New version is online, follow the remix link or via https://www.thingiverse.com/thing:3512961** **Update 6 nov : Added the PSU part of the enclosure** **Update 4 jan : Added the Covers, sidewalls and stands** Created a small video for the new version, see: https://youtu.be/lnmv40YoaOE for the new version. **Please be aware that I am designing a V2 at the moment where my lessons learned are incorporated** For my V-Core I am busy to create a tidy enclosure system for a Duet Ethernet, 24V PSU, SSR and cable guidance system. I ordered a extra V-Slot 2020 with a length of 46cm and some brackets to add the 2020 on the lower part of the V-Core frame (see pictures). **Duet 3D Ethernet enclosure** The first part that's finished is the enclosure for the Duet 3D Ethernet. Taken in account the minimal the 10 mm room below the print I added 2 x 3010 fans (24V for me) Experience has to prove if I need one or two 3010 fans. Because of the extra space between the frame and the bed frame I will add an extra 15mm of space with the cover. This will make it possible to add switches, SD card reader(s) and a extra frame for a PanelDue (touchscreen) **Enclosure Covers/Lids** 2019-02-04 Added Covers stands and sidewalls with USB and SD card holder (STL & Source) The cover will also add approx. 1,5 cm of extra height to hold a SD card reader and perhaps some extra switches available on the front side. **PSU Enclosure** A frame for the PSU and a area to add custom modules with a 35x35 mm mount system.The U frame is also used for cable management **PanelDue** A paneldue frame will add the possibility to add a touchscreen to the enclosure system.
Statistics
Likes
18
Downloads
0