TESLA Model 3 - Easy To Print V4
Description
- This is remix - V4 Update (april 2020) : - Even easier to print - Redesigned wheels - 1 Piece body, print on the supports, less deformation from buildplate - How to make instructions : - Print body with low infill, buildplate touching supports - Wheels should be printed with higher infill and higher resolution (lower layer res and thinner line helps) - Use 1.75mm filament as Axle, before assembling axle to the wheels add spacers. 2mm thick to the rear and 1.2mm to the front. - Axle in the wheels should stay with force. If not, melt the end of filament or use super glue - Model size+- : 90*40*23mm - 1:50 to the real scale - Wheels size : 13*13*5mm (On the side by side pictures : whiter one - V4, yellowish tint - V3)
Statistics
Likes
85
Downloads
0