My Reuleaux triangle fidget MakerCoin
Description
I finally made my own version of a maker coin. Decided to also make it into a test for a print-in-place spinning connection. The gap between the two parts in the STL is 0.25mm. Scale up or down to test which gap works best for your printer. 0.25mm seems to work the best for me. Printed in two colors, I think it looks quite nice. Edit 1: I corrected a small error in the model which created a smaller than .25mm gap at some points. Edit 2: V3 has a bit larger gap between the spinner body and the coin body. 0.4mm. The gap for the spinning points is still .25mm. This makes it much easyer to break it loose after print.
Statistics
Likes
6
Downloads
0