FT Foam Build Battery mount holder
Description
Hi, take a look at my other designs https://www.thingiverse.com/BuiltBrokenGlued/designs This battery mount is for the Flitetest Super Bee fuselage. **without doubler fuselage** *The width used is 54mm * *The battery width is 36.5mm* **With doubler fuselage** *The width used is 40mm* *The battery width is 36.5mm* *1mm shims can be made thicker in slicer* I can change the width on request and upload it. This is mounted to the fuselage using wooden dowels but can be hot glued for more support to allow a secure fitting. It allows a Velcro strap to surround the battery with a lip at one end to stop the battery sliding forwards on landing. **Parts** The template is used with a short sharp dowel to make the holes from the inside > out to align the battery holder in the correct place inside the model. Only 2 holes are needed. The template is 5mm thick. The Battery Holder Variable has 3 holes to allow the battery box to be moved around depending on the battery size fitted. The smaller the battery, the further forward the mount goes to move the planes weight around. I use a elastic band on either end on the dowels to stop them vibrating loose.
Statistics
Likes
6
Downloads
0