HP DPS-700 GB PSU - 700w - 80mm fan and wire mod 12AWG
Description
Hi... I needed a Fan mod for the HP DPS-700 GB PSU for fpv batterie chargers. One piece for the front and one for the back which can bei tighten with screws -little stands to prevent heat under it and good wireing solutions -the 80mm fan fits tight enough to just stick him in (wirering to one +/- output direkt) -added a standart on/off switch to turn the psu on (see picture, habe to bridge 2 contacs and wire the switched to another) -stock Power LED can bei taken to the front -under the contact panel is a small box to store wirering cables from switch and fan -build for 12AWG wire layout with two seperate line out at the side !! Print the front panel fan faced to bed !! Likes, tips or just a loud "Thank you" shout in the air, are welcome :D gl&hf
Statistics
Likes
16
Downloads
0