Kossel Effector for E3D v6 Hotend
Description
This Is A Modification Of The Standard Kossel Effector With An Optional Push Fit Mount, In Case The Original Plastic Clip Quits Its Duty. The Push Fit Thread Is 1/8" Rp. The Overall Polycount Was Also Increased And The Effector Heigt Decreased To 5.5Mm. The Mount Was Originally Planned To Be Done By A Printed Collar Which Fits The E3D Mounting Notch To The M3 Threads, But Since It Has Become A Pretty Good Press Fitting (The Effector Was In Fact 16.2Mm Instead Of The 16Mm In The Official Drawings), I Can Delay The Use Of The Additional Push Fit Option And The Collar Until Necessary.
Statistics
Likes
44
Downloads
0