Pimax 5/8K - Vive Deluxe Audio Strap Adapter V2 (Tested)
Description
### Like any 3d Printed adapters, and headstraps, use at your own risk! Originally Made for the Pimax 5K+/8K Headset using measurements from @UnholyBeardedOne at Pimax Forums, and 'image-reverse engineered' from video stills from [mixedrealityTV](https://www.youtube.com/channel/UC2mgZjuHRDW02mx_ok4wfPw) and [SweViver](https://www.youtube.com/channel/UCQ33TPQYw_-c6itr0ReIu-Q). Not all measurements are done with a caliper. This Refined version is improved upon using materials that come with the Pimax: This includes the wire velcro that comes with the headset, that can be used to connect the adapter buckle to the headset. Shortening the Hinges, making some of the scaling correct, and making it easier to insert into the headset. Tolerance for the model should be around 0.1 mm for the side hinges rod parts, while the DAS Adapter parts parts should fit snug, but it you have a very very accurate printer, you may need to glue some parts together. Using pliers you can connect the Suggested Materials: PETG, as it is flexible enough for some of the actions required for assembly. ABS may work, but it may be a bit too stiff, while PLA might be a bit too brittle. Tests are needed.
Statistics
Likes
16
Downloads
0