Adjustable EZABL mount for Titan Aero extruder
Description
This is based on my universal mount for the BLTouch and the Titan Aero which has been somewhat popular. For an idea of how it mounts, the idea behind it, and usage notes, please see: https://www.thingiverse.com/thing:2543467/files I was asked if this could be modified for use with the EZABL sensors, so here' my try at that. **NOTE THAT I DON'T HAVE ANY OF THE EZABL SENSORS MYSELF, so these so far untried**. It was just put together from a set of STL models for the EZABL sensors. Of course the EZABL sensors themselves are already adjustable via the threads along their bodies, but the screw slot adjustments on this may still be helpful for fine tuning. Or maybe not, who knows. There are versions for both the 12mm and the 18mm EZABL units, and for mounting to the left or the right of the Titan Aero (left or right, as seen when you are looking into the fan and heatsink fins of the Aero, that is). The stationary parts (the parts that bolt to the Aero) are the same for both size EZABLs, and are the same as for the BLTouch versions. Notice that the "shelf" on these versions of the mount sits at the lower end of slider (the one for the BLTouch sensor has the shelf at the upper end of the slider). IF YOU TRY ONE OF THESE, PLEASE COMMENT BACK ON WHICH AND WHETHER/HOW WELL IT WORKS SO I CAN EDIT THIS DESCRIPTION ACCORDINGLY. THANKS
Statistics
Likes
5
Downloads
0