SmartRing front support for MBS/Trampa trucks
Description
This is a front support for SmartRing using MBS or Trampa holes patterns (2 different files) This ring is a gauge communicating with VESC. The support is held by the trucks screws. Compatible with : - Trampa Vertigo - Trampa Infinity - MBS Matrix (to be confirmed) A third file is included (maskingDisk.STL) as an help to cut the masking tape before painting. WS2812 12bit ring used : https://www.ebay.fr/itm/2PCS-12Bit-WS2812-RGB-LED-Ring-5050-RGB-LED-Integrated-Driver-for-Arduino/323106677132?hash=item4b3aa8a18c:g:Nt4AAOSwk4dalssN:rk:15:pf:0 Mounting instructions : Use 3-4mm longer screws than the ones used without SmartRing support. Be sure to use washers between the screw and the support (not like the picture :D). EDIT : 29th june 2020 New version with headlight support. To be used with a XT30 female and this flashlight (no battery version, solder wires directly on battery pins, supply with 5V) : https://fr.aliexpress.com/item/32922037927.html EDIT : 11th august 2020 Update headlight support. Add 2 holes for strenghting the whole support. Requires 2x M4 threaded insert and 2x M4 countersunk screws
Statistics
Likes
6
Downloads
0