Key Holder v2 for five keys (the best)
Description
NOT FOR RESELL! If you like my design please leave a tip! As a student I appreciate it very much!! I printed this perfect keyholder for 5 keys. The hood part lifts the keys up so they can be picked out easy. Look at the pictures for the assembly. Parts: keyholder 1x keyring hole 1x ring 5x The bolts and nuts I used are: - 4,0x25mm (or longer) 1x - Nut that fits with the bolt. The bolt can be sawed off after installation. Key sizes must be between: 45mm-57mm from hole to end of key. You can always drill an extra hole in the key if it's too big. If you have less keys you can always print more rings for more space between the keys. After you printed it as shown in the pictures, you can pop the seam to make it lose. Maybe a brim is required if your adhesion is not optimal. If you want to buy the complete set contact me or shop at: https://www.etsy.com/nl/JVDesign3Dprints/listing/639365036/keyholder-for-5-keys?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1540999840786
Statistics
Likes
86
Downloads
0