Customizable Tap Wrench
Description
Customizable tap wrench - for when you just lack the right tool or the right size of your tool. I designed and printed it to hold a 1/2 '' tap with a 12mm square. It holds very well. ---- **Caution** You are on your own to customize and print this helpful piece correctly. If you design or print the piece too weak the tap wrench could break while you use it. This might expose sharp edges and lead to severe injuries. Please handle this tap wrench model responsibly and consider to take measures to protect yourself while using it (e.g. working gloves). ---- **Additional notes** * I also uploaded the original version (designed in FreeCAD) in case you rather would modify a FreeCAD model... * If you download the .scad file and open it in a recent (development) version of OpenSCAD, you will find a debug checkbox in the `Output Settings`. This will deactivate the round edges and with that improve the rendering speed. The Thingiverse Customizer doesn't seem to support checkboxes, so at the moment the only workaround is to first set the `roundness` to zero and increase it after you are finished with all your modifications.
Statistics
Likes
13
Downloads
0