ABR-2^2 Solenoid Bullpup 2-stage Flywheel Nerf Blaster
Description
ORIGINAL FILES FOUND HERE: https://github.com/ansuzalgiz/abr Edit 10/23: added step and .f3d files because I had originally forgotten them Edit 12/9: After testing, realized wheel alignment was completely off, fixed with the v3 cage Remixed from Ansuzalgiz's ABR and CUB3D DISCOUNT NERF's ABR-2 THIS HAS NOT BEEN TESTED AS OF 10/22/18 (This will change in the future) This revision adds a second flywheel cage and a 2 stage 41mm cage designed for kuryaka's daybreak flywheels. Other than the second motor bulge and wheel cutout, it's functionally the same. I'll upload a few more cage spacings if there is demand for it. (Carried over from CUB3D) This is a remix of Ansuzalgiz's ABR (Automatic Bullpup Rifle), replacing the original autopusher, designed by Kurkaya, with a generic "35mm long stroke solenoid", typically found on eBay or various Chinese webstores. Materials required are a pair of 130, 180 or 132 size can motors specced for Nerf, a pair of flywheels, two microswitches, a 35mm long stroke solenoid, and a sprinkling of wire and battery connectors to taste. All items on this list can be found at various Nerf-specific webstores such as foamblastshop.com or outofdarts.com . I am not sponsored by these sites. cough cough pay up Meishel cough cough. The one thing this project needs is a better dart pusher than the bare end of the solenoid, as the solenoid as-is does not push the dart super reliably. This part should come soon™.
Statistics
Likes
8
Downloads
0