Closetmaid Shelf Hook

Description

## Purpose: This hook is designed to allow items to be stored/hung in-front of Closetmaid shelving. ## Overview: This object is a remixed version of the [Shelf hook for boxes](https://www.thingiverse.com/thing:944501) by siderits. The major changes from the original are as follows: * Hook placement compatible with [Closetmaid SuperSlide Wire Shelving](https://closetmaid.com/webapp/wcs/stores/servlet/en/closetmaid-us/wirestorage/wireshelving/superslideshelf) * Designed for center to center distance between top and bottom shelf rods of 6.5mm and diameter of 6mm. * Retention feature on bottom hook to avoid knocking the hook off the shelf ## Sizes: Two sizes are included in this Thing, 60mm and 90mm. The distance is measured where the box will sit. Measure the dimension of the box will tell you if it will fit or not. * 60 mm should fit most boxes * 90 mm should fit jumbo-size/value-size boxes ## Usage: * Print two hooks of the same size * Hook onto wire shelving at a distance narrower than the box being held * Store box ## Assets/Source: The original Fusion 360 design file can be found here: https://a360.co/2R9o0j0

Statistics

Category

Tags