NEMA23_back_cover_resized
Description
UPDATE I added a second design with the screw sunken. This makes the back cover an other 2 mm shorter and smoother. This print needs more support and takes more time. ORIGINAL TEXT Thanks for the design. I liked and printed it. But it didn't fit my NEMA23 motors (see picture 6). Its outer diameter and the wire cover were all together to small. And I have tp protect the wiring from my secundary axis. So I draw a new model with yours in mind. Resized it to my motor and made it lower so I could use standard 25mm screws. The connector nut is a (too) tight fit now. To mount it you have to shorten the bolts of the motor by 1.5 mm. That leaves enough room in the threaded holes to mount the cover.
Statistics
Likes
27
Downloads
0