Power BLough-R Case
Description
After purchasing the Power BLough-R kit from Brian Lough (https://www.tindie.com/products/brianlough/power-blough-r) I found that there wasn't a case to house it securely. With that in mind, I took part of an afternoon and threw this together in Fusion 360. This case can be used as a soldering jig to hold the board & USB ports while anchoring the ports to the board. It was designed as a press fit case, so no screws are required and once assembled, it should hold relatively tight. For a more permanent case, simply apply glue to the inner lip of the cover before putting the top on.
Statistics
Likes
141
Downloads
0