Overwatch Snowball Rocket Bottom Remix
Description
The original model by azanders720 is pretty neat, but placing the rockets for the bottom part by hand is a bit annoying and hard to do well in some slicers. Sticks440 already remixed the rockets to include a cutout wich made glueing them to the bottom part easier, but you'd still need to place them somewhat accurately. Therefore I positioned all four rockets as outlined by azanders720's sketches and combined them with the bottom part so it can all be printed at once. The rockets are placed at a 45° angle and positioned at the midpoint of each side of the rectangular bottom plate and are all at the same height. Note though that this is incorrect as the in-game snowball only has three rockets instead of the four I used. I noticed it well after the model was done and printed and at the time simply couldn't be bothered to correct it. My Prusa i3 MK3 needed about 28 hours for that part at 100% speed with 5 shells and 20% infill at 0.1mm resolution.
Statistics
Likes
7
Downloads
0