Dremel Mill XY table mesurement system, Drag reduced
Description
I adapted the Dremel mill XY table so its easy to have a mesured distance. The numbers on the weel indicate 1/10mm and the scale on the Segment is each 1mm wide. If you want to build it you need at least 2 parts each, exept for the handels and t nuts choose the ones ywhich fit to your application. At some points it might be a little tight, then grind the dovetail aand the scale of the segment smooth. Use 3 M6 nutts and put the shroud on the middel. maby you need to turn it to a minimal toleranse fit an a hand dril or lathe. there is now the possibility to use a 22mm mall bearing eg an old skateboard baring. With a m3 screw you can fix the shroud to the wheel and therby zero the weel any time you like. Just make shure to drill a 3mm hole befor, its slightly undersized to create a nice and snug fit or force the screw in to create your own thread in the plastic. The Segment les drag has s rounding in the Dovetail corner for a easier fitting. If you like my changes ike and share it
Statistics
Likes
59
Downloads
0