Lelit 58mm portafilter funnels
Description
58mm portafilter funnel, compatible with (at least): Lelit XMC022 (normal) Lelit XMC028 (bottomless) Should fit most 58mm portafilters though. <h2>update (13 Nov 2018)</h2> New design especially for those who have the Baratza Sette 270wi (probably also for 270/270w and maybe 30). Will fit perfectly into the hold for 0 spillage. Opening will accommodate even the largest tampers destined for VST baskets so you can tamp without removing it. Should fit many 58mm portafilters but it is tested only with lelit naked/spouted. <h2>Available options</h2> *Design1* : plain with vertical outer wall, will work with all grinders *Design2* : slightly bigger funnel, will work with most grinders *Design3* : larger outer wall than 2nd design, no optimization for grinders *slim*: more difficult to print (overhangs ~60degrees) but faster and uses less plastic. Bigger funnel than previous designs but might have issues with grinders with a button. *slim v2*: similar to slim but at the end I reworked the funnel in order to work properly with most grinders. <h2>Variations</h2> *lip / nolip* : the lip files enclose the top of the basket lip so you can avoid coffee spillage outside of the basket. But you might not want that if you do the WDT and/or if you want to tamp with the funnel on. *thumb / nothumb* : Secure the funnel with your thumb and tap/knock as hard as you want !!!
Statistics
Likes
30
Downloads
0