AstroZap Bracket
Description
The Astrozap dew controller is a duty cycle control unit for up to 4 telescope heat bands. The heat generated eliminates telescope, finderscope or camera lens fogging when temperatures change. This is especially important on cold and/or humid evenings. By attaching the Astrozap electronics box to the telescope mount tripod leg, wires are much less likely to be a tripping hazard in the dark and it has a much neater look. This project consists of two 3D printed parts. The Astrozap bracket is what holds the Astrozap electronics box. The bracket screws onto a leg collar bracket. The collar grips the 2 inch diameter EXOS II Mount tripod leg. These two parts are connected with screws listed below. Note: the leg collar bracket is the same part as the one used to hold the Explore Scientific PMC-eight controller box described separately on my thingiverse webpage. Many thanks to Wes McDonald for his assistance in developing this bracket! All Paypal design tips are greatly appreciated! https://paypal.me/skislalom1
Statistics
Likes
5
Downloads
0