Cryptex-X
Description
A cryptex with ten code rings of your choice. Needed Parts: Sanding paper Super Glue Printing: Print End_Plug_Lock.stl, End_Plug_Shaft.stl, 2 x End_Plug_Ornament.stl, Lock.stl, Lock_Ring.stl, Code_Ring_Shaft.stl and 10 code rings of your choice. Code_Ring_Shaft.stl could benefit of being printed in a stronger material then PLA. All parts can print without support if placed as the STL files suggests. Assembly: Please test assemble without glue first, to ensure all parts goes together. Some grinding may (will) be needed.... 1. If the clicking, when turning the code rings seams a bit weak, carefully heat the springs on the Code_Ring_Shaft, and bend them a bit out. 2. Glue 'End_Plug_Shaft' to 'Code_Ring_Shaft'. 3. Mount the code rings on the 'Code_Ring_Shaft'. 4. Glue 'Lock_Ring' to 'Code_Ring_Shaft'. 5. Put the 'Lock' into 'Code_Ring_Shaft' and turn the rings. 6. Place the 'End_Plug_Lock' on the table, and glue it to the 'Lock'. 7. Glue the two 'End_Plug_Ornament' to the End_Plug's
Statistics
Likes
61
Downloads
0