Tesla Model S - Easy to print
Description
This is a remix i made for the Tesla Model S I split the model in two half so it is easier to print - Just glue the two parts together. No need for support now - Not even for the side mirrors :) I also cleaned the model a little bit in Meshmixer The wheels are the same as the original model - I printed 4 of these, facing with the rim up. I did use support for these. I scaled the model a 1000% in Cura and i printed it with 2 walls, 2 bottom layers and 5 top layers. The print speed was 10 mm/s for the initial layers and 60 mm/s for the rest, the infill was printed with 200 mm/s *I will soon update with pictures of the printed model!
Statistics
Likes
50
Downloads
0