Pole Ski
Description
Pole Ski 270mm long with out the jet nozzle. Uses 2 2000mah 18550 batterys, they fit down the sides of the jet unit. Mine came from a laptop battery with a dead cell. Still needs more power, might try squeeze a 3rd cell in or come up with some thing else. Nozzle needs to angle up a bit as its pushing the front down, probably sort it soon. 3x7x3 bearing in the nozzle x1 150mm long 3mm shaft Baby beast 2206, might be better with a higher KV motor. Print the impeller 2x and glue them together. 20/11/18 New upwards angled nozzle, bit less like a submarine now. Still way under powered, maybe a 4500kv motor would be ok on 2s the baby beast 2150kv I have is to slow. 9/12/18 Added 3 different pitch impellers (untested) Might change the hull bottom soon to make it float a better. 04/02/20 Have redesigned this, now only 230 long with out nozzle. New hull bottom shape so it floats better and bigger jet. Using 2 450 mah 2s battery's that fit down the sides of the jet. Just in the final stages of assembly and then testing. I'll probably upload it as a new thing instead of adding it to this one.
Statistics
Likes
59
Downloads
0