LCD12864 Arduino RAMPS case with 30x30 fan v3
Description
Below you will see what has been changed from original, missing parts are not modified and may be got from original. At the moment I only mounted lcd inside case, NOT YET TESTED WITH RAMPS, I'm waiting for cables extensions. 20xx-xx-xx: - Coming soon: I suspect that original connector can't be used with 15A power (10A bed and 5A board) so I'll replace it with SI30 ones, see link below as reference https://it.aliexpress.com/item/10-Pairs-X-30A-600-v-Connettore-Alimentazione-Spina-PP30-Rosso-Nero-PP30-Powerpole-e-20/32906818014.html 2018-11-10: - Enlarged small fan grid - Fixed missing space for fan body - 0.4mm gap reduction between 'Capot_Ecran' and 'CarterPrincipal' 2018-11-02: - SD slot has been aligned with my LCD - replaced 25mm fans with 30mm (Use M2.5x14 screws) - enlarged exit cables hole
Statistics
Likes
7
Downloads
0