Precision Piezo Orion Mount for Tevo Little Monster
Description
I finally got tired BL-Touch pin drops, inconsistencies and finally the bent pin! I decided to research into piezo bed leveling. I picked up an [Orion Precision Piezo PCB](https://www.precisionpiezo.co.uk/product-page/precision-piezo-orion-pcb). The journey didn't go quite a smoothly as I was hoping; mostly self-inflicted design flaws of my custom brackets since I wanted to utilize as much of the stock components as possible (e.g. fans, effector, etc...). I also didn't want to use a PTC fitting. ### 2019-02-18 Brought to my attention I accidentally removed the fan shroud adapter. ### 2019-01-13 Added latest v15 tops and removed the excess ones including the twist top. The conical inside increased to help dampen the noise considerably which is something I was running into with previous versions. I also added **Orion_Groove_Clamp_3-NUTS-v2.stl** that uses M3 nuts instead of brass inserts for those that don't have them readily available. Mind you, they are not better than brass inserts, just an alternative I used since the inserts I purchased were too big and wouldn't fit next to each other in one place. ### 2018-11-28 Added **Orion_Groove-TLM_Top-v9-PTC-Insert.stl** for those that would like to use [embedded collets](https://e3d-online.com/embedded-bowden-collets-for-metal-1-75mm-filament). I personally am trying this model now since the inside walls are too smooth on the SLA prints to hold the tubing on the main model design. I can get it to work if I slip some sandpaper around the tubing for grip but some of the "sand" falls in - not good. ### 2018-11-22 Uploaded v9 versions that clean up the model (from Tinkercad to Fusion360) and offers deeper wells for the threaded nuts. ### 2018-11-04 I added the following, per request: **Orion_Groove-TLM_Top-v5-M10** - threaded top for M10 PTC fitting **Orion_Groove-TLM_Top-v5-Original** - simply the top of the original PP mount on the TLM mount **Orion_Groove-TLM_Top-v5-Retainer** - like the original PP mount, but modified without the groove on the groove mount and taller.
Statistics
Likes
17
Downloads
0