Rotating dry box
Description
update 5/27/19 dried the desiccant loaded in the lid for over 12 hours at 50 degrees C and the lid did not warp. May in the future with repeated drying sessions. Gave up on the PLA spool hub adapter and just use the one for the Taulman spools now, no more sqeaking. ******************************* Rotating dry box designed for use with CR-10's but could be used for any printer with some modifications. Used to keep nylon dry when your prints will take a day or more to print yet allow the dry box to spin freely as the height of the printed model increases. Designed to hold up to four different filament spools currently; Taulman's older style 1lb Taulman's newer style 1lb Taulman's 1kg WYZworks 1kg PLA Can add any spool that is approx. 209mm OD or less by creating or modifying a simple adapter hub. For reference the inside diameter of the housing is 209.9mm. (dia of spool + dia of filament on that spool should equal 209mm or less, due to how a spool of filament is loaded) Holds 40 packets of 2g rechargeable desiccant (1.5" x .85"). rotating https://youtu.be/5J2rgRpmxqU printing pla https://youtu.be/t8ApeNKYR6M Includes rough representations of empty Taulman filament spools.
Statistics
Likes
12
Downloads
0