50mm PikoButton Camera Mount
Description
An adapter for connecting a medium 50mm water resistant PikoButton to camera-type mounts. This adapter is based on the style of similar mounting adapters by [ATMakers.org](https://atmakers.org). To assemble the mount with the switch, you will need: 1 - 3D Printed Mounting Adapter 2 - M4 machine screws, 12 mm long 1 - 1/4"-20 UNC tee nut, 5/16" long (e.g. https://www.mcmaster.com/90975A025, also available at hardware store) You will also need the following temporarily to install the tee nut: 1 - 1/4" Washer 1 - 1/4-20 UNC machine screw or bolt, 3/4" - 1-1/2" length <hr> <table><tr><td><a rel="nofollow" href="http://www.makersmakingchange.com"><img src="https://i.imgur.com/nlAliFa.png" alt="image"></a></td> <td><a rel="nofollow" href="https://www.instagram.com/makersmakingchange"><img src="https://i.imgur.com/3UuGDa7.png" alt="image"></a></td> <td><a rel="nofollow" href="https://twitter.com/makermakechange"><img src="https://i.imgur.com/GZmeImw.png" alt="image"></a></td> </tr></table><br> <font color="#404041"><b>Volunteer your 3D printing skills to help people with disabilities in your community!</b><br></font><Br> <font color="#404041">Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that helps people with disabilities.</font><br><br> <font color="#404041">We are committed to creating a network of volunteer makers who support people with disabilities in their communities through 3D printing assistive devices. Check out our library of free, open-source assistive technologies with parts and build instructions.</font> <div><p><a rel="nofollow" href="https://www.makersmakingchange.com"><img src="https://i.imgur.com/QCafg8l.png" alt="makers making change"></a>
Statistics
Likes
9
Downloads
0