Piano Sustain Pedal
Description
This is a sustain pedal for MIDI controllers with a print in place axle. **Parts List** - 1590B enclosure or similar - Momentary SPST footswitch - 1/4" or 3.5mm mono jack socket, or one of each - Two M4x12 nuts and bolts - Some wire Drill holes in the enclosure, mount the parts, solder the socket to the switch. As electronics projects go, it doesn't get much simpler. It would work without the printed part, but it makes it feel more like a real piano.
Statistics
Likes
5
Downloads
0