Flower Vase
Description
I designed this vase to look different from the other vases I designed. I'd recommend printing this at 0.1mm layer height. The top will fail at higher layer heights. The reason for this is that for a 0.4 mm nozzle, it will be able to support itself on more layers with a 0.1 layer height, as the step upwards is smaller. However, with something like a 0.3mm layer height, the step upwards is greater which means that there will be less plastic (or in some cases no plastic) where the nozzle can lay its layer down. On a prusa i3mk2s it takes about 4 hours at 60mm/s and at 190mm x and y so its not a terribly slow print regardless. Thank you for downloading!
Statistics
Likes
7
Downloads
0