Tevo Tornado e3D v6 fang mount with BL-touch
Description
Hotend mount for the e3d v6 on the Tevo Tornado, it might also work with the CR-10 but I did not test that. I switched from my anet a8 to the tevo tornado and I missed the e3d hotend (I had a e3d v6 on my anet). The printquality of the e3d v6 hotend is just a tiny bit better than the original one. I used the frame-piece of "DemolitionX" and slightly modified it so you can mount a BLTouch sensor to it. I used the BLtouch mount of "gdramos". So the BlTouch offsets are; - x=42,5mm - y=12,5mm - z=0mm The marlin software can be downloaded here: https://www.dropbox.com/s/lfg2wd5sq3f0wtw/Tornado_Firmware_Updated.zip?dl=0 installation guide: https://www.youtube.com/watch?v=mBwHGuX5de8 Hardware: Original screws e3D v6+BlTouch (of course) 5015 Blower fan Print: 1x e3d v6 mount with BLTouch_fixed.stl 1x e3d_v6_modular_fang.stl I also included the version without the BlTouch
Statistics
Likes
60
Downloads
0