Ultimate Samsung Galaxy Note 3 Case w/ Cover, Magnetized, Sugru
Description
Update 10-15-2014 . A Uploaded A New Version Of The Cover That Gets Rid Of A Small Gap In The Bottom Corners, As Brought To My Attention By User Kareesmoon. . See This Video For Some Of The Features: Http://Youtu.Be/Rtbjehun_Za . I Was Fed Up With The Dismal Case Options For My Samsung Note 3 Phone, So I Decided To Build My Own With All The Features The Other Cases Lacked, Including A Magnetized Cover And Sugru Bumpers. . Here Are Other Variations: * No Bumpers (Magnets, Cover): Http://Www.Thingiverse.Com/Thing:414865 * No Cover (Sugru Bumpers, No Magnets) Http://Www.Thingiverse.Com/Thing:424089 * No-Frills (No Bumpers, No Cover, No Magnets): Http://Www.Thingiverse.Com/Thing:415418 . I Designed The Case In Three Parts So That Printers With Small Build Areas (6"X6") Such As The Printrbot Simple Metal Could Still Print It. . The Case Features A Protective Cover With Holes Cut Out To Show The Time And The Music/Audiobook/Podcast Navigation Buttons. Now You Can Check The Time In A Theatre Without Distracting Your Fellow Movie-Goers! . The Cover Is Held On By Tiny Magnets. You Can Purchase Them For Under 3 Bucks Here: Https://Www.Amazon.Com/Gp/Product/B0065O63Bk/Ref=Oh_Aui_Detailpage_O03_S00?Ie=Utf8&Psc=1 . I Also Added Magnets To The Back Of The Case So You Can Place The Cover On The Back When You'Re Using The Phone. The Back Magnets Also Allow You To Use The Cover As A Stand. (See Pictures.) . This Case Is Designed To Fit The Note 3 Without The Original Back Piece. You Can Still Access The Battery By Sliding Off The Two Sections. . I Initially Printed A Hole In The Cover That Allowed You To Take Pictures With The Cover Attached To The Back, But I Took This Off Because I Realized I Am Always Going To Take The Cover Off When Taking Pictures. . The Four Corners Have Sugru Grips For Added Protection. I Designed The Corners So That The Sugru Sticks Securely. Buy Sugru At Http://Sugru.Com Or On Amazon Here: Https://Www.Amazon.Com/Gp/Product/B0065O63Bk/Ref=Oh_Aui_Detailpage_O03_S00?Ie=Utf8&Psc=1. Requires 2 Small Packs. . In The Pictures Above, I Applied Four Coats Of Plasti-Dip Spray To The Outer Surfaces, But In Retrospect, I Don'T Recommend Doing This. The Plasti-Dip Eventually Peeled Off. . I Went Through 5 Iterations Before Perfecting The Case. After Printing The Version You See In The Pictures, I Added A Half A Millimeter Extra To The Length So You Won'T Have A Gap Where The Top And Bottom Meet. (Sand For A Perfect Fit.)
Statistics
Likes
80
Downloads
0