450 Drone Quadcopter Behemoth
Description
I designed this DJI 450 inspired 3D printable version, because I had printed the design of @villamany and had many trouble with it, especially with broken pieces and no consistent flight behaviour, so I decided to take the DJI F450 Design and make it a Behemoth, so even the 3D printed parts have maximum strength but yes, they are a little bit heavier. https://youtu.be/-CmQ_CUXsfw What you need to print: - 4x ARM - 1x BASE - 1x TOP - 2x LEG - 1x FCSM What you could print if you've got same parts: - 1x GPS - 1x BC - 1x BVC What you need to have: ( I use ) - 2x Motor CW with d=16/19mm drilling M3 ( 2216 810kV ) - 2x Motor CCW with d=16/19mm drilling M3 ( 2216 810kV ) - 4x ESC ( 30A ) - 1x PTB ( Matek PDB-XT60 ) - 1x FC ( F3 10DOF Deluxe ) - 2x Propeller CW ( 9450 / 1045 ) - 2x Propeller CCW ( 9450 / 1045 ) - 1x Receiver ( Taranis X8R ) - 4x Gimbal Damper ( 60g ) - 1x Transmitter ( Taranis Q X7 ) - 1x Battery 3-4S ( 3S 3500mAh ) - 1x Battery Strip ( Banggood ) - 1x GPS ( RCG Ublox M8N GPS ) - 1x Battery Voltage checker Screws: - 16x M3x12 - 24x SPAX 4x20 < or > 24x M3x16 with M3 brass mold inserts
Statistics
Likes
39
Downloads
0