Worker Dominator Flywheel Cage (43.5mm)
Description
This is my first attempt at a purpose-built flywheel cage for the Worker Dominator. Currently, there are no Dominator specific flywheel cages on the market, other than the very expensive Gen 3 worker cages (eww canted) so I decided to start editing a 43.5mm Kelly cage to work with the double stack mag. The issue with most modern cages is that they have a feed lip to keep darts aligned and in your mag, which is obviously designed for a standard mag and will not fit the wider double magazine form factor. The dominator mag also does not center the feed, it feeds to two spots, offset from the center. this means that cages with a tighter guide won't be wide enough to let darts be pushed into the wheels. I edited the standard Kelly cage by removing the guide, then add my own chamfer and edge blend to funnel darts into the cage. I also increased the internal diameter of the dart path slightly, since the stock Kelly cage is a little tight and I figured it needed as much wiggle room as possible. Hopefully, it's still tight enough to consistently center the darts and send them down the dominator barrel straight. I have not tried this yet, my blaster is still in the mail. Please let me know how it works.
Statistics
Likes
14
Downloads
0