Magicool 180 mm Silverstone FT02 Brackets
Description
This is a bracket set to mount the Magicool Extreme Triple 180mm x 35mm Slim Radiator to the SilverStone SST-FT02 Fortress Mid-Tower Case using the factory holes. To install, after removing the dust filters and mounts, mount these brackets to the bottom of your magicool radiator and insert the rear retainers into the slots then screw in the fronts. You will need to then screw the fans into place after the radiator has already been secured. I have omitted the middle bracket since it is difficult to get all 3 secured at once. Also, there is an offset, the brackets are not symmetrical. The bracket near the front end of the case is 3 mm left from center and the one near the rear of the case is 7 mm left of center. Note, the radiator will not be fully secured until the 3x 180mm fans are in place.
Statistics
Likes
2
Downloads
0