E-wings Vortigaunt Removable Wing Joiners
Description
Removable wing joiners for the E-wings Vortigaunt. They have a recess for velcro, simply glue them to the fuse and the wings slot in, and can be velcro'd to secure. Works with the standard kit, you will need to slice a small piece from the trailing edge to allow it to slide in properly, but other than that there are no mods required. Ideally you would use a spar sleeve, the Vortigaunt supplied spar is 8mm outer diameter, so a sleeve spar with 8mm inner diameter would work well. It's not strictly required but will add durability and strength if you are removing the wings regularly.
Statistics
Likes
3
Downloads
0