Shopping list dispenser
Description
I have this kind of shopping list dispenser in metal for a few years in my kitchen and find it very handy. I challenged myself to make a 3d printed version of it to learn drawing in Fusion 360 and to learn printing with my first 3d printer. You have to print one of each part except the 'left_right' part, you need two of them. The back part is printed on its back, so when you print on a glass bed you have a smooth surface to write on the shopping list. The left and right part can be press fitted to the back and the pencil holder slides into the left and right part. The bridge can also be press fitted to the back part. The inner and outer pin to hold the paper role (45mm wide) need a little glue to keep them in place. The back plate is actually a little too large (210mm x 100mm) for my ender-3 (it should fit, but it didn't) so the printer printed it a little too small (at the top) but i found it not a big issue. You can press in ten little 10x5x2mm magnets (i got them from banggood.com) at the back plate to attach the dispenser to a metal surface such as a refridgerator, or use screws to attach the dispenser.
Statistics
Likes
19
Downloads
0