1.25" Vacuum Drill Dust Collector #2
Description
This is a partial redesign of our original DC, https://www.thingiverse.com/thing:3207227. Things are roundier, and at least on our first tests, suckier, likely due to the rounder passageways and slightly cleaner interior. We also wanted it to stick to the wall on its own, which this does, with no post-processing required: https://youtu.be/g8TKLEhH0KE Two files are available; dust disk horizontal, and vacuum port horizontal (e.g., flipped vertially). We're still printing with the dust disk horizontal with no supports, which means the inside gets a little stringy. In vertical most it might print pretty well without supports, but Simplify3D puts a lot of supports up during print prep In addition, our internal CAD model is now easier to work with, so at the very least we'll do a 1.5" version, and an adapter for our lovely Ryobi 18V One+ hand-held vacuum. The crosshairs will likely return, but honestly, we weren't using them; the hole's already marked. The 1.26 file prefix is for a slightly-larger inlet diameter.
Statistics
Likes
210
Downloads
0