Surface Pro VESA 75x75 Mount With fan
Description
This VESA mount is based on the one designed by ohliobohlio. I printed his model but while using it i noticed my surface was getting a bit too hot during idle. This because while Surface Pro 4 (i5/i7) and Surface Pro 2017 (i7) models have active cooling inside, the one i own is based on passive cooling and the top right corner didn't dissipate enought because of the missing space in between the device and the mounting plate. The edit i made adds a 80mm fan mount on the right side while leaving 5mm of space between the device and the mount for a better air flow. Features: (copied and updated from ohliobohlio page) - any orientation possible* - all buttons and ports (including microSD) are accessible - front "lips" do not cover screen pixels (only bezel) - type cover can be attached - all ventilation holes (top half) are not obstructed - no support material needed for the left side piece** - almost no support material needed for the connecting piece - added active cooling for fanless models - right side piece needs support materials *You need to open the kick-stand for upside-down landscape mode. **Print the left side pieces with the outer (left) surface facing down. Thanks again to ohliobohlio for sharing his design
Statistics
Likes
6
Downloads
0