TEVO CREALITY ENDER DIRECT DRIVE X CARRIAGE X-CARRIAGE UPGRADE!!
Description
This is a cheaper way of getting a direct drive setup working on 2020 rail 3D printers. This is a major remake of this thing on Thing: 2833791 by NYSTAO (THANK YOU NYSTAO.) Know this works on: CR10(s) TEVO's ENDERS and many more still testing on others. As of now this is my first release to this and will be updating along the way. I wanted a cheaper way to print most all 1.75 filaments without paying a 160$ USD price tag from E3D and might I say is outrages I think.I will be adding wire management to this also. This will print flexiable filment also without problems of jamming. To print flexiable filment just add pointed cut tube to the throat of the hot end and your good to go. Parts list: Extruder used except for stepper motor and heatsink. <--- https://www.amazon.com/gp/product/B07BMPN9YC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07BMPN9YC&linkCode=as2&tag=tech3dp-20&linkId=91dda0d3c4a908e9a6d93008b07719d9 1 = Nema 17 Motor used <--- https://www.amazon.com/gp/product/B07BMPN9YC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07BMPN9YC&linkCode=as2&tag=tech3dp-20&linkId=91dda0d3c4a908e9a6d93008b07719d9 x = Nuts Bolts used <--- https://www.amazon.com/gp/product/B07BMPN9YC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07BMPN9YC&linkCode=as2&tag=tech3dp-20&linkId=91dda0d3c4a908e9a6d93008b07719d9 *"Optional "* 1 = Fan 30x30mm or use fan off clone e3d <--- https://www.amazon.com/gp/product/B07BMPN9YC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07BMPN9YC&linkCode=as2&tag=tech3dp-20&linkId=91dda0d3c4a908e9a6d93008b07719d9 3 = Wheels used from original x carriage. 1 = E3d Clone and take fan and hotend and install to extruder mount<--- https://www.amazon.com/gp/product/B07BMPN9YC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07BMPN9YC&linkCode=as2&tag=tech3dp-20&linkId=91dda0d3c4a908e9a6d93008b07719d9 Printer runs allot quieter and much better print lines. Also can use throat from original cr10 hotted also. I used the volcano hotend with .60 brass nozzle for faster prints. (Fast Video below) https://drive.google.com/file/d/0B92qQ0se5yBtb0tyS1ZFVUdQakwtamRiRGQtN2UwWFR5YnVF
Statistics
Likes
3
Downloads
0