Star_Led Motorbike Blinker
Description
This is the last evolution of my DIY motorbike led blinker. This arrows is a simple and minimalistic aftermarket solution to the original blinker for my bike and can be used on any motorcycle brand. The assembly is componed by: <ul> <li>PLA Main body</li> <li>PLA Led Cover</li> <li>Clear lens (100°)</li> <li>Star led Orange (1 - 3W)</li> <li>3x M3 screws</li> <li>TPU printed gasket</li> </ul> The internal component i used are easily purchasable on e-bay: <ul> <li>Led star: </ul> http://www.ebay.it/itm/1W-3W-10W-LED-Component-Grow-Light-Aquarium-red-green-royal-blue-violet-UV-/131345637382?var=&hash=item64459ba62a </li> <ul> <li>Clear Lens: </ul> http://www.ebay.it/itm/Lenti-per-1W-3W-Led-45-60-90-100-Cesto-Angolare-Acquario-Luce-Tenue-Lente-/142668007599?var=&hash=item66d47f60bf The led blinker must be wired in series with a suitable resistance to be feed withe 12V. To achieve the best results, the main body should be printed in the original position of the STL, as shown in the 5th image.
Statistics
Likes
90
Downloads
0