Handcuffs (without additional hardware)
Description
This is an remix of a wonderful pair of handcuffs, desingned by sthone. For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. Also 2 Pins of 1.75 Filament are needed to secure the locking-bar (red on 3nd the pic). For the second cuff mirror, -'Handcuff_Casing.STL' -'Handcuff_Casing_Face.STL' (-'Handcuff_Locking_Arm_Bow.STL', only to have the same surface, but technically not needed) in your slicer. The key is a normal handcuff key (for example: https://www.thingiverse.com/thing:752482)
Statistics
Likes
72
Downloads
0