12mm(1/2") Through hole hose fitting wall mount
Description
My plan was to send a fuel line through a wall, and it needed to be water tight on the outside. There is a slot for an O-Ring on the outside base. ID: 1 7/16 - OD: 1 11/16 - Thickness: 1/8 (Got the O-ring from the Harbor freight O-ring set) The screw indents are designed for #8 Truss head screws with a 11mm head. The outside Base Tip, is just a strain relief for the hose, it just pops in with a little glue. The Outside Base should be flipped so the o-ring side is facing up, and enable supports. Not strictly needed though, it just makes the screw holes cleaner. This ended up working perfectly, and is strong.
Statistics
Likes
20
Downloads
0