Deep Madness Investigator Card Holder
Description
A card holder and dashboard for the investigator cards and related tokens/equipment cards for the board game deep madness. Contains: - Space for Investigator card - Spinner to keep track of health - Slot for drowning dial - Slots for both sanity and madness tokens - Space on ledge for other tokens - Slots for stands so it can be used flat, at 30 degrees or at 60 degrees Front panel can be printed in the 6 colours to match the coloured bases supplied with the game. BOM (per stand): - 1x 8mm M3 Screw - 1x M3 Brass knurled nut ( https://www.banggood.com/100pcs-M3x5x5mm-Metric-Threaded-Brass-Knurl-Round-Insert-Nuts-p-1050182.html?rmmds=myorder&cur_warehouse=CN ) - 1x M3 Washer Assembly: - Glue the front and middle parts together. - Insert the knurled nut into the hole using a soldering iron. - Affix the spinner using the M3 screw, suing the washer as a spacer. Don't over tighten, just enough to give a bit of resistance while spinning and to hold in place. A small amount of glue can be useful to keep the screw in place. - Glue the rear part onto the assembly. CHANGE-LOG 29/11/2018 - Updated the spinner to be more optimised for printing with a 0.4mm nozzle. New file uploaded. Ensure extrusion width for top layer is 0.4mm. 18/02/2018 - Added a Mk2 variant to the spinner that utilises the dual colour, single nozzle technique Devan from Make Anything showed on his YouTube channel: https://www.youtube.com/watch?v=KV2AjyowXX4&t=1003s This variant doesn't have a spacer on it so will require a washer or similar to be used as a spacer. 17/11/2019 - Uploaded assembly instructions with images in pdf format. Uploaded amended front and middle panels that give more room for sleeved cards.
Statistics
Likes
33
Downloads
0