Charlie Brown LED Forest - battery holder & switch base
Description
A Remix of a Remix! I made a small "forest" of trees that light up. My wife said the trees reminded her of the sad Charlie Brown (of Peanuts) scrawny, lopsided Christmas tree. So, I had to add the sign. This builds on the original work of [pauloricca](https://www.thingiverse.com/thing:1406) and [Alzibiff](https://www.thingiverse.com/thing:193814). I used the 10mm_hole.stl from Alzibiff as main source. I designed a battery base for the Christmas tree to hold the [LilyPad Battery Holder & Switch](https://www.sparkfun.com/products/13883). Cura 3.5.1 did the Slice and Scale for the trees. I scaled at :1.60/160% (qty 1); 1.30/130% (qty 1); 10mm hole as given (qty 2); and .60/60% (qty1), five total, for the different sizes. Each tree took about 2-2.5 hours to print. There are two sizes for the battery base. The one including "small" in the stl name is only for the 60% scale tree. The rest can use the other base stl. The "Plaque" that reads "Charlie Brown Memorial Forest" took about 1.5 hours to print in brown PLA. I used [Adafruit Prod # 679](https://www.adafruit.com/product/679), Diffused 5mm Slow Fade RGB LED's.
Statistics
Likes
77
Downloads
0