Sebart PC-21/50 servo holder gear door
Description
Hi, this is a part to create a servo holder gear door, like this you can remove the small original cord, you will need 2 servos 4.6g (PLANET-HOBBY ECO PLUS MICRO SERVO MICRO 8 PRO 4,6G/ Lindinger), 2 small horns 13,5X16 + pushrods and 3 tiny screws. i used the sequencer who is in my DX20 (Spektrum) The print was made in PLA at 100% infill and 0.2mm
Statistics
Likes
2
Downloads
0