4010 Fan Covers for Bullseye Pipe
Description
I wanted a slightly difference look for the Petsfang Bullseye Duct on my Ender-3 and Ender-3 Pro printers. In my previous video on placing covers on the two hot end fans... https://youtu.be/iMo5XEVOxX0 I have since drawn new versions of thing:2802474 making it 35mm center to center to match the 4010 filament cooling fan, making it thicker so a separate spacer is no longer needed and the cover has a notch to match (clear) the 4010 pipe. I liked the appearance of the 40mm Turbine Style Fan Cover thing:2505568.The 4010 fan is off center and the Turbine cover by itself restricts the air intake. A second version of my cover was drawn to match the Turbine style cover for the 4010 fan. My grid type cover spaces the Turbine Style cover far enough away from the 4010 that air intake is not restricted. The 40mm Turbine Style Cover needs to be stretched to 43.5mm to match the 4010 fan. Stretching the X & Y dimensions to 109.4% will make it work. Note: The Bullseye Pipe I am using is an older version. The Bullseye Pipe has been updated with wider and thicker arms and the base modified to accept the modified arms.
Statistics
Likes
133
Downloads
0